RACKS

8-unit rack with two lids made of dark brown bodywork that looks black from a distance.

Interior measurements:

Length: 50.9 cm | Depth: 60 cm | Height: 35.6 cm (+ 2 5.5 cm caps)

External measurements:

Length: 53.7 cm | Width: 73.8cm | Height: 41.4 cm

The rack contains the following accessories:

2 handles (1 on each long side), 4 locks, 2 front rack guides and 2 skids for rack support.

10-unit rack with three lids made of 9 mm dark brown board that looks black from a distance.

Interior measurements:

Length: 57.8 cm | Depth: 52 cm | Height: 86 cm | Base: 66cm | Top cap: 20cm

The rack contains the following accessories:

4 casters with brakes, 4 handles, 10 locks, 1 drilled piano hinge and 2 90-degree stock hinges.
4 rack guides, each 10 units high, located at the front and rear (they reach all the way to the top at this point).
2 strips of alveolar finishing foam on each lid, 7.5 cm thick.
1 fixed tray with foam to adjust the raid, 1 removable tray with foam to adjust the computer, 1 wedge measuring 53 x 20 x 10 cm with 2 rack guides of 3 units in height made of the same material as the box, 1 screwable blanking plate of 4 units of black rack without holes for through screws to anchor the monitor support.

12-unit rack made of 9 mm dark brown panel that looks black from a distance.

Interior measurements:

Length: 50.9 cm | Width: 50cm | Height: 53.4 cm

External measurements:

Length: 54 cm | Width: 74.5cm | Height: 72 cm

The rack contains the following accessories:

4 handles, 4 wheels with brakes of 100 mm diameter, 4 locks, 8 corner pieces, 4 guides for double racking (2 front and 2 rear)
behind).
4 ventilation grilles, 2 skates or strips of 1.5 cm thick on the 7.5 cm lid to support the box, 1 cable gland on the bottom of the 14 cm lid measuring 20 x 10 cm with a brush, customer logo on 1 side of the
CNC machined box and a compartment to fit the case in the 7.5 cm lid.